SN74LV573ATDGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV573ATDGVR Overview
In the 20-TFSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. Tape & Reel (TR) is the way in which it is packaged. Tri-State is used for the output it is configured with. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 2V~5.5V, it operates. There is a temperature of -40°C~85°C at which the system operates. In the 74LV series, this FPGA is located. With this electronic part, there are 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. 74LV573 is its family. With a supply voltage of 5V, it operates. 20 pins are provided. In the world of electronics, this electronic device belongs to the family of LV/LV-A/LVX/H. The 20 pins are designed into it. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. This part can be found within the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 5.5V. 5V power supplies are needed to operate it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. Electronic circuits comprise 8 input lines. The device's reliable performance makes it a good choice for TR. The output current of 16mA makes it feature maximum design flexibility.
SN74LV573ATDGVR Features
20-TFSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
5V power supplies
SN74LV573ATDGVR Applications
There are a lot of Texas Instruments SN74LV573ATDGVR Latches applications.
- Network Switches
- Control circuits
- OC-48 communication systems
- Motor Drives
- Automotive Body Electronics
- Frequency
- Timers
- Accumulator Registers
- Decade counting 7-segment decimal display
- Shift right with parallel loading