SN74LV373ATDBE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LV373ATDBE4 Overview
In the 20-SSOP (0.209, 5.30mm Width) package, it is embedded. Tube is the way it is packaged. It uses the output configuration Tri-State. This electrical device has Logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. With a supply voltage of 2V~5.5V, it operates. It is -40°C~85°C at the operating temperature. This FPGA is part of the 74LV series. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. 74LV373 is its family. The device works with a voltage of 5V for its supply voltage. 20 pins are included. It is a member of the LV/LV-A/LVX/H family of electronic devices. The device has 20 pins. The electronic part is mounted using the Surface Mount method. This device has a total of 2 ports. The part is in the FF/Latches subcategory. There are 3.3V power supplies required for this machine to operate. It consists of 8 input lines from which an electronic circuit can be built. It features maximum flexibility in design due to 16mA output current. A high level of efficiency is achieved by maintaining the supply voltage at 5V.
SN74LV373ATDBE4 Features
20-SSOP (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
SN74LV373ATDBE4 Applications
There are a lot of Texas Instruments SN74LV373ATDBE4 Latches applications.
- Parallel Output
- Automotive Cluster
- Registers
- Multistage ripple counting
- OC-48 communication systems
- Automotive Infotainment
- Display
- Communication systems
- Four-bit storage with output enable
- Timers