SN74LV373APWG4
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 22 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
SN74LV373APWG4 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. It is packaged in the way of Tube. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. A 2V~5.5V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. The 74LV series contains FPGAs of this type. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. The family it belongs to is 74LV373. The device works with a voltage of 2.5V for its supply voltage. It has 20 pins that makes it easy to use. It is a member of the LV/LV-A/LVX/H family of electronic devices. The device has 20 pins. The electronic part is mounted using the Surface Mount method. This device has a total of 2 ports. Subcategory FF/Latches includes this part. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. The device is powered by 3.3V power supplies. A supply voltage (Vsup) greater than 2V is required. The output current of 16mA makes it feature maximum design flexibility. Input lines are converted into binary equivalents by 8 output lines. It consists of 1 elements. Its maximum current supply (ICC) reaches 0.02mA.
SN74LV373APWG4 Features
20-TSSOP (0.173, 4.40mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LV373APWG4 Applications
There are a lot of Texas Instruments SN74LV373APWG4 Latches applications.
- Watches
- Shift Registers
- Data acquisition
- Automotive HEV/EV Powertrain
- Parallel data synchronization
- Parallel Input
- Flip-flops
- Pattern Generators
- Parallel-to-Serial Data Conversion
- Parallel Input