SN74LV165AD
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 165MHz |
| Base Part Number | 74LV165 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 28 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 2 |
| fmax-Min | 45 MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV165AD Overview
16-SOIC (0.154, 3.90mm Width) is the package in which the device is embedded. A total of 16 terminations can be found on the chip. There is a Tube case containing it. Parts with a 2.5V operating supply voltage are specified. 1 elements are present in this part. 16 pins are present on the device. It is recommended that the mount should be done by Surface Mount. Electronic components are categorized as LV/LV-A/LVX/H. Surface Mount is the way in which this component is mounted. A temperature range of -40°C~125°C is used for operation. There is a voltage supply within 2V~5.5V. Similar parts can be found using the 74LV family. A 74LV165 family can be used to search for similar parts. The following additional aspects of this section are worth noting: SISO OPERATION ALSO AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 2V. Voltage can be delivered at 3.3V. This part requires a maximum supply voltage (Vsup) of 5.5V. It is necessary to operate 2 output lines. The device runs its frequency at 165MHz.
SN74LV165AD Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV165 family
It supplies 3.3V power
With 2 output lines
SN74LV165AD Applications
There are a lot of Texas Instruments SN74LV165AD Shift Registers applications.
- Remote control holding register
- Pattern Recognizers
- Sequence generator
- LED matrix control
- 8-bit data storage
- data manipulation
- 7-segment display control
- Serial to parallel converter
- Serial-to-parallel data conversion
- Cache memory in CPU