SN74LS174D
| Parameters | |
|---|---|
| Propagation Delay | 35 ns |
| Turn On Delay Time | 20 ns |
| Family | LS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 26mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 5V, 15pF |
| Prop. Delay@Nom-Sup | 30 ns |
| Trigger Type | Positive Edge |
| Number of Input Lines | 2 |
| fmax-Min | 30 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Min Supply Voltage (DC) | 4.75V |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74LS174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 6 |
| Number of Circuits | 7 |
| Output Current | 8mA |
| Number of Bits | 6 |
| Clock Frequency | 40MHz |
SN74LS174D Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A 4.75V~5.25Vsupply voltage is required for it to operate. It is operating at a temperature of 0°C~70°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74LS series. A frequency of 40MHzshould not be exceeded by its output. A total of 1 elements are present. T flip flop consumes 26mA quiescent energy. It has been determined that there have been 16 terminations. The 74LS174 family contains this object. The power supply voltage is 5V. A device of this type belongs to the family of LS. In this case, the electronic component is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 6bits are used in this part. Despite its superior flexibility, it relies on 7 circuits to achieve it. It runs on 5Vvolts of power. Optimal efficiency requires a supply voltage of 5V. Its output current of 8mAallows for maximum design flexibility. The number of input lines is 2. It is reported that there are 6 channels.
SN74LS174D Features
Tube package
74LS series
16 pins
6 Bits
5V power supplies
SN74LS174D Applications
There are a lot of Texas Instruments SN74LS174D Flip Flops applications.
- Single Down Count-Control Line
- ESD performance
- Shift Registers
- Storage Registers
- Computing
- Data transfer
- Functionally equivalent to the MC10/100EL29
- Test & Measurement
- Convert a momentary switch to a toggle switch
- Circuit Design