SN74HC595DBR
| Parameters | |
|---|---|
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Propagation Delay | 34 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Output Lines | 10 |
| fmax-Min | 29 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
SN74HC595DBR Overview
As a result, 16-SSOP (0.209, 5.30mm Width) package contains the embedded device. The number of the chip's terminations sums up to 16. The Tape & Reel (TR) case contains it. The part operates at 5V voltage. A total of 1 elements can be found on this part. 16 pins are provided on the device. Mounting by Surface Mount is recommended. This electronic component is classified as HC/UH. There is a component mounted in the way of Surface Mount on this board. There is a range of temperatures -40°C~85°C for operation. Votage is supplied within 2V~6V. In this case, the electrical component belongs to the series 74HC. With 74HC595 family search, you can find similar parts. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There must be a minimum supply voltage (Vsup) of 2V for this part. Devices with voltage delivery capabilities of 2/6V are available. The maximum supply voltage (Vsup) for this part should not be more than 6V. It is necessary to operate 10 output lines. There is a quiescent current of 8μA flowing through it. There are 4 circuits in this device. There is a TR packaging for the part.
SN74HC595DBR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR
SN74HC595DBR Applications
There are a lot of Texas Instruments SN74HC595DBR Shift Registers applications.
- store data in digital form
- ROM Chips
- Data Format Converters
- temporary data storage
- 8-bit data storage
- Delay Line
- Serial-to-parallel data conversion
- Interconnectors
- Dual-rank shift, hold, and bus applications
- Output expansion