SN74HC594DR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Base Part Number | 74HC594 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 185 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Input Current | 1μA |
| Number of Output Lines | 10 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC594DR Overview
There is an embedded device in the package 16-SOIC (0.154, 3.90mm Width). Chip terminations add up to 16. This item is packed in case Tape & Reel (TR). Voltage rating of the part is 5V. 1 elements are present in this part. 16 pins are located on the device. It is recommended that the mount should be done by Surface Mount. The electronic component belongs to the HC/UH. Mounting of this component is indicated by Surface Mount. There is a range of temperatures -40°C~85°C for operation. Votage within 2V~6V is supplied. In the 74HC series, this electrical component is found. Search for similar parts based on the 74HC594 family. As noted, this chip operates within the range of 5V. For this part, Vsup should not be less than 2V. The device is capable of delivering voltage at 2/6V. This part requires a maximum supply voltage (Vsup) of 6V. A total of 10 output lines are available for operation. An electronic device such as this one has 4 circuits in it. There is a TR packaging for the part. The device runs its frequency at 40MHz.
SN74HC594DR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC594 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Packing Method : TR
SN74HC594DR Applications
There are a lot of Texas Instruments SN74HC594DR Shift Registers applications.
- Pulse Extenders
- Data Processors
- Sequence generator
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- 7-segment display control
- Remote control holding register
- Interconnectors
- Remote control holding register
- 8-bit data storage