SN74HC273NG4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 60MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| RoHS Status | ROHS3 Compliant |
SN74HC273NG4 Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. D flip flop is included in the Tubepackage. Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. Through Holeis occupied by this electronic component. It operates with a supply voltage of 2V~6V. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74HC series. There should be no greater frequency than 60MHzon its output. D latch consists of 1 elements. There is 8μA quiescent consumption. This D latch belongs to the family of 74HC273. There is 3pF input capacitance for this T flip flop.
SN74HC273NG4 Features
Tube package
74HC series
SN74HC273NG4 Applications
There are a lot of Texas Instruments SN74HC273NG4 Flip Flops applications.
- Frequency Dividers
- ATE
- Reduced system switching noise
- Matched Rise and Fall
- Cold spare funcion
- Safety Clamp
- Data storage
- QML qualified product
- Communications
- Single Down Count-Control Line