SN74F323DWR
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Family | F/FAST |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 12 ns |
| Power Supply Current-Max (ICC) | 95mA |
| fmax-Min | 70 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74F323DWR Overview
In package SOIC, there is an embedded device. 20 is the sum of the number of terminations in the chip. The part operates at 5V voltage. In this case, the electronic component belongs to the F/FAST. Additional aspects of this section include: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. There should be no less than 4.5V supply voltage (Vsup) for this part. It can deliver voltage at 5V. It is recommended that the maximum supply voltage for this part is not greater than 5.5V (Vsup). A total of 8 bits are present on an IC chip. In total, it has 20 pins. This subcategory falls under the Shift Registers category. It should only be used at temperatures below 70°C.
SN74F323DWR Features
It supplies 5V power
SN74F323DWR Applications
There are a lot of Texas Instruments SN74F323DWR Shift Registers applications.
- data transfer
- LED matrix control
- Pseudo Random Pattern Generator
- Remote control holding register
- Serial-to-parallel data conversion
- 7-segment display control
- Serial-to-parallel data conversion
- Data manipulation
- Interconnectors
- Parallel to serial converter