SN74AUP1G79DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Base Part Number | 74AUP1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Output Current | 4mA |
| Number of Bits | 1 |
| Clock Frequency | 266MHz |
| Propagation Delay | 17.3 ns |
| Turn On Delay Time | 3 ns |
| Family | AUP/ULP/V |
| Current - Quiescent (Iq) | 500nA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 30pF |
| Prop. Delay@Nom-Sup | 24 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.5pF |
| Power Supply Current-Max (ICC) | 0.0009mA |
| fmax-Min | 260 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 220000000Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AUP1G79DBVRG4 Overview
It is packaged in the way of SC-74A, SOT-753. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Non-Invertedas the output. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. A 0.8V~3.6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74AUPseries FPGA. Its output frequency should not exceed 266MHz Hz. Despite external influences, it consumes 500nAof quiescent current. Currently, there are 5 terminations. If you search by 74AUP1G79, you will find similar parts. Power is supplied from a voltage of 1.2V volts. This T flip flop has a capacitance of 1.5pF farads at the input. Electronic devices of this type belong to the AUP/ULP/Vfamily. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 5 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. This flip flop is designed with 1 Bits. Vsup reaches 3.6V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be above 0.8V. Its flexibility is enhanced by 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. With an output current of 4mA, this device offers maximum design flexibility.
SN74AUP1G79DBVRG4 Features
Tape & Reel (TR) package
74AUP series
5 pins
1 Bits
SN74AUP1G79DBVRG4 Applications
There are a lot of Texas Instruments SN74AUP1G79DBVRG4 Flip Flops applications.
- Buffer registers
- Synchronous counter
- Buffered Clock
- Latch
- CMOS Process
- Bounce elimination switch
- Counters
- Parallel data storage
- Supports Live Insertion
- Single Down Count-Control Line