SN74AS4374BDW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | DUAL-RANK FLIP-FLOP |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 125MHz |
| Family | AS |
| Current - Quiescent (Iq) | 150mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74AS4374BDW Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). As part of the package Tube, it is embedded. There is a Tri-State, Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. It is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. Temperature is set to 0°C~70°C TA. The type of this D latch is D-Type. The 74ASseries comprises this type of FPGA. Its output frequency should not exceed 125MHz Hz. A total of 1 elements are present. As a result, it consumes 150mA quiescent current and is not affected by external forces. The number of terminations is 20. It is powered from a supply voltage of 5V. ASis the family of this D flip flop. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. There are 2 ports embedded in the flip flops. DUAL-RANK FLIP-FLOPis also one of its characteristics.
SN74AS4374BDW Features
Tube package
74AS series
SN74AS4374BDW Applications
There are a lot of Rochester Electronics, LLC SN74AS4374BDW Flip Flops applications.
- Digital electronics systems
- Functionally equivalent to the MC10/100EL29
- Common Clocks
- Registers
- Event Detectors
- Individual Asynchronous Resets
- Dynamic threshold performance
- ESCC
- Control circuits
- 2 – Bit synchronous counter