SN74ALVCH162721DL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G56 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | ALVC/VCX/A |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 20 |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 6.7 ns |
| Height Seated (Max) | 2.79mm |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
SN74ALVCH162721DL Overview
The item is packaged in 56-BSSOP (0.295, 7.50mm Width)cases. You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ALVCHseries FPGA. In order for it to function properly, its output frequency should not exceed 150MHz. A total of 1elements are contained within it. It consumes 40μA of quiescent current without being affected by external factors. There have been 56 terminations. It is powered by a voltage of 1.8V . This T flip flop has a capacitance of 3.5pF farads at the input. It is a member of the ALVC/VCX/Afamily of D flip flop. As soon as 3.6Vis reached, Vsup reaches its maximum value. There are 2 ports embedded in the flip flops.
SN74ALVCH162721DL Features
Tube package
74ALVCH series
SN74ALVCH162721DL Applications
There are a lot of Rochester Electronics, LLC SN74ALVCH162721DL Flip Flops applications.
- Modulo – n – counter
- Test & Measurement
- QML qualified product
- Data storage
- High Performance Logic for test systems
- Instrumentation
- Convert a momentary switch to a toggle switch
- Bounce elimination switch
- Buffer registers
- Storage registers