SN74ALS299NE4
| Parameters | |
|---|---|
| Propagation Delay | 19 ns |
| Turn On Delay Time | 25 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 30 MHz |
| Length | 24.325mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
SN74ALS299NE4 Overview
The device is embedded in PDIP package. 20 is the number of terminations on the chip. A Rail/Tube case holds it. A voltage of 5V is specified for the part's operating supply. In this device, there are 20 pins. The recommended mounting method is Through Hole. An electronic component is included in the ALS. It is noted that this chip uses an operating supply voltage of 5V. The following additional elements are important to note: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. In the device, there are 10 input lines. There is a capability to deliver voltage at 5V. A total of 8 bits are present on an IC chip. 20 pins are present on it. It should be used below 70°C. In order for this device to function, the value should not be less than 0°C. A voltage of this type is employed under 5.5V. This supply voltage is employed higher than 4.5V. In this device, there are a total of 1 circuits.
SN74ALS299NE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74ALS299NE4 Applications
There are a lot of Texas Instruments SN74ALS299NE4 Shift Registers applications.
- Serial to parallel converter
- temporary data storage
- Cache memory in CPU
- Dual-rank shift, hold, and bus applications
- Pattern Recognizers
- Pulse Extenders
- Remote control holding register
- ROM Chips
- store data in digital form
- Parallel data