SN74ALS29821DW
| Parameters | |
|---|---|
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION |
| Subcategory | FF/Latches |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ALS29821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Output Current | 48mA |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 2 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 115mA |
| Current - Output High, Low | 24mA 48mA |
| Max I(ol) | 0.048 A |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
SN74ALS29821DW Overview
It is embeded in 24-SOIC (0.295, 7.50mm Width) case. It is contained within the Tubepackage. It is configured with Tri-State, Non-Invertedas an output. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.75V~5.25Vis used as the supply voltage. Currently, the operating temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. The list contains 1 elements. During its operation, it consumes 115mA quiescent energy. Currently, there are 24 terminations. Members of the 74ALS29821family make up this object. A voltage of 5V is used to power it. ALSis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. It is designed with 24 pins. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. The flip flop has 2embedded ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 48mA. This input has 3lines in it. Additionally, you may refer to the additional POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTION of the electronic flip flop.
SN74ALS29821DW Features
Tube package
74ALS series
24 pins
SN74ALS29821DW Applications
There are a lot of Texas Instruments SN74ALS29821DW Flip Flops applications.
- ATE
- ESCC
- Convert a momentary switch to a toggle switch
- Bus hold
- Data Synchronizers
- Balanced Propagation Delays
- ESD protection
- Event Detectors
- Bounce elimination switch
- Matched Rise and Fall