SN74AHCT573QDWRQ1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AHCT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74AHCT573 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AHCT573QDWRQ1 Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. A Tape & Reel (TR) package is used to package it. It uses Tri-State as the output. This electrical device has the logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. With a supply voltage of 4.5V~5.5V, it operates. During operation, the temperature is set at -40°C~85°C. The Automotive, AEC-Q100, 74AHCT series contains FPGAs of this type. This electronic part is designed with 8 Bits. A device such as this has 20 terminations designed. 74AHCT573 is the family name of it. The device works with a voltage of 5V for its supply voltage. The 20 pind are equipped with it. This electronic device belongs to the family of AHCT/VHCT. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches includes this part. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. A total of 5V power supplies are needed to run it. It is recommended to have a higher supply voltage (Vsup) than 4.5V. On the basis of its reliability, this device is well suited for TAPE AND REEL.
SN74AHCT573QDWRQ1 Features
20-SOIC (0.295, 7.50mm Width) package
Automotive, AEC-Q100, 74AHCT series
8 Bits
74AHCT573 family
20 pin count
20 pins
5V power supplies
SN74AHCT573QDWRQ1 Applications
There are a lot of Texas Instruments SN74AHCT573QDWRQ1 Latches applications.
- A/D converters
- Display driver
- Phase comparator
- Hammer Device Information
- Programmable binary
- Automotive Cluster
- Storage
- Parallel-to-Serial Data Conversion
- Shift register
- Parallel data synchronization