SN74AHC594PW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 170MHz |
| Base Part Number | 74AHC594 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 14.4 ns |
| Turn On Delay Time | 14.4 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Input Current | 1μA |
| Number of Output Lines | 9 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC594PW Overview
There is a 16-TSSOP (0.173, 4.40mm Width) package embedded with the device. This chip has a total termination count of 16. A Tube case is used to pack it. Its operating supply voltage is rated at 3.3V. Devices with 16 pins are available. It is recommended that the mount should be done by Surface Mount. Electronic components belong to the AHC/VHC/H/U/V group. Mounted in the same way as Surface Mount. -40°C~125°C is the range of operating temperatures for the device. There is a voltage supply within 2V~5.5V. This electrical component belongs to the 74AHC series. A 74AHC594 family can be used to search for similar parts. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL OUTPUT AVAILABLE. There should be no voltage less than 2V at the minimum supply voltage (Vsup). There are 1 input lines available in the device. Voltage can be delivered at 2/6V. The maximum supply voltage (Vsup) for this part should not be more than 5.5V. 9 output lines are available for operation. The device runs at 170MHz.
SN74AHC594PW Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC594 family
It supplies 2/6V power
With 9 output lines
SN74AHC594PW Applications
There are a lot of Texas Instruments SN74AHC594PW Shift Registers applications.
- Data manipulation
- Parallel to serial converter
- Data Processors
- LED matrix control
- Delay Line
- Dual-rank shift, hold, and bus applications
- Counter
- store data in digital form
- Serial-to-parallel data conversion
- Flash Memory