SN74ACT374DWR
| Parameters | |
|---|---|
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 90000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT374 |
| Function | Standard |
SN74ACT374DWR Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. There is an embedded version in the package Tape & Reel (TR). In the configuration, Tri-State, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74ACTseries of FPGAs. There should be no greater frequency than 160MHzon its output. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20 terminations have been made. Members of the 74ACT374family make up this object. Power is provided by a 5V supply. A 4.5pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the ACTfamily. It is mounted by the way of Surface Mount. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. To achieve this superior flexibility, 8 circuits are used. Due to its reliability, this T flip flop is well suited for TR. The D latch operates on 5V volts. This D flip flop is equipped with 0 ports. If high efficiency is desired, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 24mA . Currently, there are 3 input lines present.
SN74ACT374DWR Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
SN74ACT374DWR Applications
There are a lot of Texas Instruments SN74ACT374DWR Flip Flops applications.
- Frequency Dividers
- Matched Rise and Fall
- Event Detectors
- Balanced 24 mA output drivers
- Single Down Count-Control Line
- High Performance Logic for test systems
- Safety Clamp
- Instrumentation
- Dynamic threshold performance
- Registers