SN74ABT16374ADL
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ABT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 2mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 5.9 ns |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Width | 7.49mm |
| RoHS Status | ROHS3 Compliant |
SN74ABT16374ADL Overview
It is embeded in 48-BSSOP (0.295, 7.50mm Width) case. D flip flop is embedded in the Tube package. T flip flop uses Tri-State, Non-Invertedas the output. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis used as the supply voltage. -40°C~85°C TAis the operating temperature. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74ABT series. A frequency of 150MHzshould be the maximum output frequency. D latch consists of 2 elements. It consumes 2mA of quiescent current without being affected by external factors. There are 48 terminations,You can search similar parts based on 74ABT16374. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the D flip flop belongs to the ABTfamily. This RS flip flops is a part number FF/Latches. As soon as 5.5Vis reached, Vsup reaches its maximum value. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. A power supply of 5Vis required to operate it. A total of 2ports are embedded in the D flip flop.
SN74ABT16374ADL Features
Tube package
74ABT series
5V power supplies
SN74ABT16374ADL Applications
There are a lot of Texas Instruments SN74ABT16374ADL Flip Flops applications.
- EMI reduction circuitry
- QML qualified product
- Modulo – n – counter
- Bus hold
- Count Modes
- Control circuits
- Set-reset capability
- Memory
- Computing
- Automotive