SI1040X-T1-GE3
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-563, SOT-666 |
| Number of Pins | 6 |
| Weight | 32.006612mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 625MOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 174mW |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | SI1040 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 174mW |
| Switch Type | General Purpose |
| Output Current-Max | 8A |
| Drain to Source Voltage (Vdss) | 8V |
| Nominal Input Voltage | 8V |
| Continuous Drain Current (ID) | 430mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~8V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 500m Ω |
| Drain to Source Resistance | 500mOhm |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE SINK |
| Height | 600μm |
| Length | 1.7mm |
| Width | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SI1040X-T1-GE3 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a SOT-563, SOT-666 package that includes it.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -55°C~150°C TJ for reliable performance.By default, it is set to output 1.A maximum output voltage of P-Channel volts can be obtained with this LED driver.Features of the lighting driver are Slew Rate Controlled.The SI1040 family consists of this type.A total of 6 terminations have been recorded.It is necessary to use the 6 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.High efficiency is possible at 2.5V supply voltage.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 6 pins.Lighting drivers with 625MOhm resistance are used.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.A maximum supply voltage of 8V is set in Vsup.The total number of channels is 2.
SI1040X-T1-GE3 Features
Supplied from 2.5V
Resistance of 625MOhm
2 channels
SI1040X-T1-GE3 Applications
There are a lot of Vishay Siliconix SI1040X-T1-GE3 Power Switches ICs applications.
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- Hot Swaps
- Low Voltage I/O System Power
- Notebook PC
- Portable/Handheld Devices
- Hot-Swap Systems
- USB Power Distribution
- Solid-State Drives
- Gaming