SCC2692AC1A44-T
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 44 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 3.6864MHz |
| Supply Current-Max | 10mA |
| Data Rate | 115 kbps |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Source Url Status Check Date | 2013-06-14 00:00:00 |
| Data Encoding/Decoding Method | NRZ |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SCC2692AC1A44-T Overview
The type uPs/uCs/Peripheral ICs is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In its configuration, 44 terminations are used.To operate it, 5V is provided as the supply voltage.In order to communicate data, there are 2 serial I/Os.This electronic device is a type of 44-pin IC.The clock frequency of this IC is measured at 3.6864MHz.A device's configuration is based on its 44 pins.Operating at 70°C is its maximum temperature limit.Keeping the supply voltage below 5.5V is crucial for normal operation.Universal asynchronous receiver-transmitter is possible to transfer data using 15 I/Os.Supply voltage must remain above 4.5V in order to ensure normal operation.10mA is an acceptable maximum supply current.
SCC2692AC1A44-T Features
2 serial I/Os
Clock frequency of 3.6864MHz
15 I/Os
SCC2692AC1A44-T Applications
There are a lot of NXP Semiconductors / Freescale SCC2692AC1A44-T UARTs applications.
- Ethernet Network to Serial Ports
- Personal Digital Assistants
- GPS Systems
- Battery Operated Electronics
- Cellular Data
- Wireless Infrared Data Communications Systems
- Portable Appliances
- Ethernet Network Routers
- Cellular Phones DataPort
- DTE for Modem Communication Systems