SC28L92A1B,557
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Surface Mount | YES |
| Packaging | Tray |
| Published | 2004 |
| Series | Impact |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC28L92A |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 2.1mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
SC28L92A1B,557 Overview
This product is available in a cost-effective package called 44-QFP.In order to transmit data, there are 2, DUART channels available.Tray is adopted as the packaging option.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.Configured with 44 terminations.This device is powered by a voltage of 3.3V.As of right now, this electronic part is in a Active status.In order to communicate data, there are 2 serial I/Os.Surface Mount is the method for mounting it.This device operates with a supply voltage of 3.3V 5V.Electronic devices such as this are known as 44-pin integrated circuits.There is 8MHz clock frequency measured on this IC.Various similarities make it an appropriate candidate for inclusion in the subcategory of Serial IO/Communication Controllers.UART possesses some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter.The device is capable of operating at a maximum temperature of 85°C.If the power supply is set to 3.3/5V, it is reliable and efficient for electronic designers.In addition, it has the capability of performing ALSO OPERATES AT 5V SUPPLY.This part has a base part number of SC28L92A.At a minimum temperature of -40°C, it is capable of operating.The electronic component has been classified as a member of the Impact series.
SC28L92A1B,557 Features
2 serial I/Os
Clock frequency of 8MHz
Power supplies of 3.3/5V
ALSO OPERATES AT 5V SUPPLY
SC28L92A1B,557 Applications
There are a lot of NXP USA Inc. SC28L92A1B,557 UARTs applications.
- Handheld Computers
- Ethernet Network to Serial Ports
- GPS Systems
- Point-of- Sale Terminals
- Cellular Data
- Infrared Transceivers
- Handheld Terminal
- Wireless Infrared Data Communications Systems
- Serial to Parallel/Parallel to Serial Converter
- Battery Operated Instruments