SC28L202A1DGG,118
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | Impact |
| JESD-609 Code | e4 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC28L202A |
| Pin Count | 56 |
| JESD-30 Code | R-PDSO-G56 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Address Bus Width | 7 |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3.125Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.375 MBps |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 256 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
SC28L202A1DGG,118 Overview
Alternatively, UART can be purchased in the cost-effective 56-TFSOP (0.240, 6.10mm Width) package.The transmission of data takes place over 1, UART channels.As for packaging, Tape & Reel (TR) is chosen.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.As part of its configuration, it uses 56 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Active.There are 2 serial I/Os working as a way for data communication.UART can be mounted through a way of Surface Mount.In order for it to operate, a voltage of 3.3V 5V must be applied.UART is a type of 56-pin integrated circuUART.This IC measures its clock frequency at 50MHz.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter that are present in it.The device is capable of operating at a maximum temperature of 85°C.Moreover, it is also able to perform ALSO OPERATES AT 3.3V SUPPLY.In order to identify this part, its base part number is SC28L202A.At a minimum temperature of -40°C, it is capable of operating.The electronic component belongs to the series Impact.
SC28L202A1DGG,118 Features
2 serial I/Os
Clock frequency of 50MHz
ALSO OPERATES AT 3.3V SUPPLY
SC28L202A1DGG,118 Applications
There are a lot of NXP USA Inc. SC28L202A1DGG,118 UARTs applications.
- Factory automation and process control
- Remote Access Servers
- Ethernet Network to Serial Ports
- Point-of- Sale Terminals
- Cellular data devices
- Portable and battery operated devices
- Communications equipment
- Gaming Terminals
- Universal PCI Bus Add-in Card
- Multi serial ports RS-232/RS-422/RS-485 Cards