SC26C92A1B,551
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Surface Mount | YES |
| Packaging | Tray |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC26C92 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 2.1mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
SC26C92A1B,551 Overview
In addition, it is available in the cost-effective package 44-QFP.There are 2, DUART channels used for transmission.Tray is adopted for packaging.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 44 terminations.This device is powered by a voltage of 5V.In the present state, this electronic part is Obsolete.As a means of transferring data, there are 2 serial I/Os.A method of mounting it is through Surface Mount.5V supply voltage is required to operate it.There are 44 pins on this electronic device.A frequency of 8MHz is measured for this IC.Several characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter are present in it.Operating at 85°C is its maximum temperature limit.The base part number of the part is set to SC26C92.In order to operate, the device must be kept at a minimum temperature of -40°C.
SC26C92A1B,551 Features
2 serial I/Os
Clock frequency of 8MHz
SC26C92A1B,551 Applications
There are a lot of NXP USA Inc. SC26C92A1B,551 UARTs applications.
- Ethernet Network Routers
- GPS Devices
- Multi serial ports RS-232/RS-422/RS-485 Cards
- DTE for Modem Communication Systems
- Personal Digital Assistants Modules
- Multimedia Systems
- Industrial computing
- Infrared Transceivers
- Domestic Applications
- Portable Appliances