SC26C562C1A,512
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 52-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 52 |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SC26C562 |
| Pin Count | 52 |
| JESD-30 Code | S-PQCC-J52 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | DMA |
| Number of I/O | 8 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Clock Frequency | 16MHz |
| Supply Current-Max | 80mA |
| Address Bus Width | 6 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 8086; IAPX 86 |
| Data Transfer Rate-Max | 1.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; X.75; BISYNC; EXT SYNC; ADCCP; DDCMP |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 19.125mm |
| Width | 19.125mm |
| RoHS Status | ROHS3 Compliant |
SC26C562C1A,512 Overview
The 52-LCC (J-Lead)package would be a good match for it.A case of Tubeis provided.The component has been installed according to the Surface Mountmethod.It is possible to obtain devices that supply 4.5V~5.5V volts.A SC26C562can be used to identify related parts.The termination count on it is [0].Make sure this device is set to 5V.Operation is carried out using the 52pins.There are electronic components in the Other Microprocessor ICs family.When a supply voltage of 70°Cis applied to the potentiometer, it conducts.Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL.The device is capable of delivering voltage at 5V.Performance requires that the output frequency of the device not exceed 16MHz.The device is programmed with 8 I/Os.There are 2 serial I/Os available in the interface IC.
SC26C562C1A,512 Features
It is based on SC26C562.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
SC26C562C1A,512 Applications
There are a lot of NXP USA Inc. SC26C562C1A,512 Specialized Interface ICs applications.
- Multiplexers
- Battery Powered Systems
- Signal routing between systems
- Industrial and process control systems
- Existing multiplexer applications (both fault-protected and
- Access Concentrators
- Remote Powered Equipment
- Cable Modem, Cable PC
- CSU/DSUs
- Cell phones