SC16C752IB48,551
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Terminations | 48 |
| Additional Feature | ALSO OPERATES AT 2.5 V SUPPLY |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 48 |
| JESD-30 Code | S-PQFP-G48 |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 3.63V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.97V |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
SC16C752IB48,551 Overview
As its uP/uC/Peripheral ICs type, SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used.In order to configure this device, 48 terminations are used.UART operates on 3.3V supply voltage.As a way to communicate data, the board has 2 serial I/Os.This device is an integrated circuit with 48 pins.Its clock frequency is measured at 80MHz.A maximum temperature of 85°C is possible for it to operate at.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 2.5 V SUPPLY.At a minimum temperature of -40°C, it is capable of operating.By maintaining the supply voltage below 3.63V, normal operation can be assured.Supply voltage must remain above 2.97V in order to ensure normal operation.
SC16C752IB48,551 Features
2 serial I/Os
Clock frequency of 80MHz
ALSO OPERATES AT 2.5 V SUPPLY
SC16C752IB48,551 Applications
There are a lot of NXP Semiconductors / Freescale SC16C752IB48,551 UARTs applications.
- Domestic Applications
- Router C ontrol
- Handheld Terminal
- Remote Access Servers
- Ethernet Network Routers
- Wireless Portable Point-of-Sale Terminals
- Portable and battery operated devices
- Point-of- Sale Terminals
- Infrared Transceivers
- Factory automation and process control