PIC24FJ128GA010-I/PT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® 24F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 16MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24FJ128GA010 |
| Pin Count | 100 |
| Lead Pitch | 500μm |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 84 |
| RAM Size | 8K x 8 |
| Memory Type | FLASH, SRAM |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, PMP, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Access Time | 16 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Density | 1 Mb |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 54 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 5 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 9 Weeks |
| Mount | Surface Mount |
PIC24FJ128GA010-I/PT Overview
Due to its space-saving qualities, it is available in the 100-TQFP package. A Surface Mount mounting method is used. It comes in a Tray package. Device with PIC core processor issupported. During work, the temperature should remain at -40°C~85°C TA. It has a type of program memory of FLASH. The device has 84 I/Os. A comparable component can be found by using the base part number PIC24FJ128GA010. At QUAD, it has its terminals. There are a total of 100 terminations in it. It is a member of the PIC? 24F series of electrical components. It is possible to achieve high efficiency with a 3.3V supply voltage. As a storage type for data, FLASH, SRAM is used. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. There are 100 pins used in the construction of this device. This mount is done in accordance with the method of Surface Mount. This device has a total of 100 pins. In the subcategory of Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 128kB. This device works well at 16MHz frequency when it is operating at a high rate of efficiency. It belongs to the PIC CPU family. A chip with 54 programmable inputs/outputs is available. Normal operation requires a supply voltage (Vsup) that is higher than 2V. An oscillator type Internal is required for it to work.
PIC24FJ128GA010-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24FJ128GA010-I/PT Applications
There are a lot of Microchip Technology PIC24FJ128GA010-I/PT Microcontroller applications.
- Toasters
- Paper shredders
- Microwave ovens
- Digital TVs
- Calculators
- Calculator
- Telephone sets
- Graphic terminals
- Set-top boxes
- Mobile computers