PIC18LF2682-I/SP
| Parameters | |
|---|---|
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 80kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 3.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, HLVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 80KB 40K x 16 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| CPU Family | PIC |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 40MHz |
| Base Part Number | PIC18LF2682 |
PIC18LF2682-I/SP Overview
As a result, it is available in the 28-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. You can find it in the package of Tube. There is a PIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 25 I/Os on it, which makes it a very simple device. In order to find similar components, it has a base part number of PIC18LF2682. At DUAL, it has its terminals. A 28 termination is contained within it. PIC? 18F is the series number of this electrical component. High efficiency is possible due to the 3V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. The structure is constructed from 28 pins. During the mounting process, the device is mounted based on the Through Hole method. There are a total of 28 pins on it. The component is included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 80kB. A 2.5/5V source of power is being used to run it. Working at a frequency of 40MHz results in excellent efficiency. 4 timer/counters are present. It belongs to the PIC CPU family. Normal operation requires a supply voltage (Vsup) that is higher than 2V. Using an oscillator type of Internal, it works.
PIC18LF2682-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC18LF2682-I/SP Applications
There are a lot of Microchip Technology PIC18LF2682-I/SP Microcontroller applications.
- Volt meter
- Fabric
- Home appliances
- Process control devices
- Answering machines
- Communication-bluetooth, Wi-Fi, radio
- DCS control intelligent sensor
- Speed meter
- Hard drives
- Digital set-top boxes