PI3B3253QE
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3253 |
| Operating Supply Voltage | 3.3V |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Number of Ports | 5 |
| Power Dissipation | 500mW |
| Output Current | 120mA |
| Number of Bits | 8 |
| Throw Configuration | 4PST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.2 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3B3253QE Overview
Providing this information in the 16-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.Tube represents its packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer/Demultiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 3V~3.6V supply voltage, which gives it a lot of flexibility.This configuration includes 16 terminations as part of its basic functionality.The base part number is 3253, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 3.3V volts.As the end of conductors, it uses GULL WING.The supply type of this multiplexer ic is Single.The board has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBTLV/3B family.Signal multiplexer provides 8 bits.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.It consumes 3μA current of multiplexer ic without external influences.If the supply voltage is 3.3V, reliable performance of the multiplexers can be achieved.The resistance is 5.Signal source consists of 2 output lines.120mA provides a high degree of switches' flexibility.
PI3B3253QE Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
2 output lines
PI3B3253QE Applications
There are a lot of Diodes Incorporated PI3B3253QE Signal Switches / Multiplexers / Decoders applications.
- Injectors
- Speed synchronization of multiple motors in industries
- Make full adder
- Data bus control
- Decimal decoder
- HD surveillance system
- Audio transmission
- Automatic health monitoring systems
- Microprocessor instruction decoding
- Seven segment displays