PI3A223ZMEX
| Parameters | |
|---|---|
| Factory Lead Time | 27 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 750mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 4.2V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 3μA |
| Max Supply Current | 7μA |
| Turn On Delay Time | 25 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 10 ns |
| -3db Bandwidth | 84MHz |
| On-State Resistance (Max) | 750mOhm |
| High Level Output Current | 300mA |
| Low Level Output Current | 300mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 39 dB |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 13ns, 38ns (Typ) |
| Charge Injection | 50pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω (Typ) |
| Crosstalk | -90dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.2V |
| Height Seated (Max) | 0.6mm |
| Length | 1.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3A223ZMEX Overview
This electronic part is conveniently packaged in 10-UFQFN, making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 10. A 1 channel electronic part produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. These analog multiplexers are built based on SPDT switching circuits. There are 2 circuits in this switch device. The internal resistance of this digital multiplexer is 750mOhm. You can find the functions of the 10 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 4.2V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 1.65V. In order to operate this switch device, it would need a current of 1μA. Analogue multiplexers require a 1.65V~4.2V voltage to drain from a single voltage supply. A voltage higher than 7μA may cause damage to the switch multiplexer.
PI3A223ZMEX Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 84MHz
PI3A223ZMEX Applications
There are a lot of Diodes Incorporated PI3A223ZMEX Analog Switches & Multiplexers ICs applications.
- Cable PC
- Avionics
- DVD-R
- USB 1.1 signal switching circuits
- Audio and video switching
- Private Branch Exchange (PBX)
- Remote wireless modules
- SONET/SDH ADM
- E1 Multiplexer
- Battery Powered Instruments