PH18CNT20NASA
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Number of Pins | 4 |
| Housing Material | ABS |
| Operating Temperature | -25°C~60°C |
| Published | 2012 |
| Series | PH |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IP67, IP69K |
| Output Configuration | NPN |
| Cable Length | 78.74 2m |
| Output Current | 100mA |
| Response Time | 1ms |
| Adjustment Type | Adjustable, 210° Turn Potentiometer |
| Sensing Distance | 787.402 (20m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (850nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Ratings | IP66 |
PH18CNT20NASA Overview
For reliable performance, the temperature of the photoelectric sensor should be set to -25°C~60°C. In order for these electronic components to work, their voltage must be set to 10V~30V. When it comes to photoelectric sensors, a response time of 1ms is ideal. This photoelectric sensor can only function properly if the 4 pins are connected. Photoelectric sensors are designed to operate with a current of 100mA at the output. In a DC circuit, you can apply a voltage of 30V without damaging the photoelectric sensor. Photoelectric sensors can operate at low voltages, such as 10V.
PH18CNT20NASA Features
Sensing Distance: 787.402 (20m)
4 pins
Response Time: 1ms
Operating Temperature: -25°C~60°C
PH Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
PH18CNT20NASA Applications
There are a lot of Carlo Gavazzi Inc. PH18CNT20NASA Photoelectric Sensors applications.
- detect objects
- Entrance and gate
- Checking objects on production lines or conveyors
- Detecting colours
- Counting small objects
- Passive infrared sensors
- Pharmaceutical industry
- Contrast sensors
- Measuring distance
- Zone scanners