OMH360S
| Parameters | |
|---|---|
| Package / Case | 3-SIP Module |
| Surface Mount | NO |
| Mounting Feature | THROUGH HOLE MOUNT |
| Number of Pins | 3 |
| Actuator Material | Magnet |
| Operating Temperature | -55°C~125°C TA |
| Published | 1998 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| Termination | PC Pin |
| Type | Hall Effect Sensor |
| Resistance | 820Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Other Sensors |
| Technology | BIPOLAR |
| Voltage - Supply | 24V |
| Reach Compliance Code | unknown |
| Frequency | 200kHz |
| Termination Style | PC Pin |
| Body Length or Diameter | 4.06mm |
| Body Breadth | 1.52 mm |
| Output Type | Current |
| Max Output Current | 25mA |
| Operating Supply Voltage | 25V |
| Power Supplies | 4.5/24V |
| Output Polarity | INVERTING |
| Housing | CERAMIC |
| Output Range | 0.19-0.40V |
| Magnetic Field Range-Min | -25 mT |
| Magnetic Field Range-Max | 25 mT |
| Input Mode | UNIPOLAR |
| Body Height | 5.85mm |
| RoHS Status | Non-RoHS Compliant |
OMH360S Overview
The magnetic position sensor modules are put into 3-SIP Module packages. 3 pins are present on the sensors modules. A magnetic position sensor module should operate with a voltage of 25V.
OMH360S Features
Package / Case: 3-SIP Module
Operating Temperature: -55°C~125°C TA
Supply Voltage: 24V
Frequency: 200kHz
3 Pins
Operating Supply Voltage: 25V
OMH360S Applications
There are a lot of TT Electronics/Optek Technology OMH360S Magnetic Position Sensors Modules applications.
- Wiper home/end position sensor
- Speed and direction of gears
- Reed switch replacement
- Medication dispensing control
- Position tracking
- Industrial process control
- Security and military applications
- Motor assemblies
- Conducting objects
- Flow-rate sensing