NX3V1G66GW,125
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NX3V1G66G |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 25MHz |
| On-State Resistance (Max) | 450mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 70pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 24ns, 9ns |
| Charge Injection | 12pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 49ns |
| Switch-off Time-Max | 26ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Normal Position | NO |
| Length | 2.05mm |
| RoHS Status | ROHS3 Compliant |
NX3V1G66GW,125 Overview
The electrical component comes in 5-TSSOP, SC-70-5, SOT-353 packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 1:1. Around -40°C~125°C TA is the extended operating temperature. There are 5 terminations totally. The electronic part provides high-quality output because it has 1 channels. Powered by a 1.65V voltage supply, the electrical part should be switched on and run. There are 5 pins injected into the electronic part body. A SPST - NO switching circuit is used for these analog switches. A total of 1 circuits make up this switch device. Use NX3V1G66G to search for variants of the digital switches. Theswitch device is a typical Multiplexer or Switches. Draining from a single voltage supply, this analog switch requires a voltage of 1.4V~4.3V.
NX3V1G66GW,125 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 25MHz
NX3V1G66GW,125 Applications
There are a lot of NXP USA Inc. NX3V1G66GW,125 Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- SONET/SDH ADM
- CSU
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Relay replacements
- Medical systems
- SDH/SONET multiplexers
- Power routing
- Audio and video signal routing
- Existing multiplexer applications (both fault-protected and nonfault-protected)