NX3L2T66GT,115
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3L2T66G |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
| Power Supplies | 1.5/3.3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 28ns, 20ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switch-on Time-Max | 57ns |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Normal Position | NO |
| Height Seated (Max) | 0.5mm |
| Length | 1.95mm |
| RoHS Status | ROHS3 Compliant |
NX3L2T66GT,115 Overview
The electrical component comes in 8-XFDFN packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Operational temperature extended around -40°C~125°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 1.65V volts, the electrical component should be turned on and run. 8 pins are injected to the electronic part body. A SPST - NO switching circuit is used to build these analog multiplexers. A total of 2 circuits make up this switch device. NX3L2T66G can be used to search for analog multiplexer variants. The analogue multiplexer in this example is a typical Multiplexer or Switches. Using a single voltage supply, this switch device consumes 1.4V~4.3V volts.
NX3L2T66GT,115 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 60MHz
NX3L2T66GT,115 Applications
There are a lot of NXP USA Inc. NX3L2T66GT,115 Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- Sample-and-hold systems
- High speed data transmission line cards
- Automotive applications
- E1 Multiplexer
- Multi-Line E1 Interface Cards
- Cable Modem
- Fiber to the Home
- Video switching
- SONET/SDH ADM