NX3L2T384GM,125
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3L2T384G |
| Pin Count | 8 |
| JESD-30 Code | S-PQCC-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
| Power Supplies | 1.4/4.3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SPDT |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 40ns, 15ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Normal Position | NO |
| Height Seated (Max) | 0.5mm |
| Length | 1.6mm |
| RoHS Status | ROHS3 Compliant |
NX3L2T384GM,125 Overview
Packed in 8-XFQFN Exposed Pad, the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Total terminations are 8. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 1.65V is used, the electronic component should be turned on and run. This electronic part can be found in the 8 series. Circuits based on SPST - NC switching are used to construct these analog switch ics. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with NX3L2T384G. The analog multiplexer shown here is a typical Multiplexer or Switches. Analogue multiplexers require a 1.4V~4.3V voltage to drain from a single voltage supply. Integrated with an analog IC SPDT.
NX3L2T384GM,125 Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 60MHz
NX3L2T384GM,125 Applications
There are a lot of NXP USA Inc. NX3L2T384GM,125 Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Relay replacements
- Audio signal routing
- DSLAMs
- Automatic test equipment
- DSUs
- Isolation
- Microprocessor controlled systems
- Multiplexers
- Cable Telephony – NIU, Set-Top Box, Home Side Box