NX3L2G66GM,125
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NX3L2G66G |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | S-PQCC-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
| Power Supplies | 1.5/3.3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 23ns, 8ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 48ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Normal Position | NO |
| Height Seated (Max) | 0.5mm |
| Length | 1.6mm |
| RoHS Status | ROHS3 Compliant |
NX3L2G66GM,125 Overview
The electrical component comes in 8-XFQFN Exposed Pad packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 8. This electronic part offers high-quality output due to its 1 channels. A 1.65V voltage supply should turn on and run the electronic component. There is an electrical component included in the 8 series. A SPST - NO switching circuit is used for these analog switches. 2 circuits are used in this analogue multiplexer. Search with NX3L2G66G if you are looking for analog multiplexer variants. This switch device is a typical Multiplexer or Switches. A voltage of 1.4V~4.3V is required to drain this analog switch from a single voltage supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
NX3L2G66GM,125 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 60MHz
NX3L2G66GM,125 Applications
There are a lot of NXP USA Inc. NX3L2G66GM,125 Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Ultrasound
- Industrial
- Multiplexers
- Digital cross connects (DSX-1)
- High-Voltage
- Channel Banks
- Residential Gateways, Home Gateway/Router
- Sample-and-hold systems
- T1/E1 Terminals