NX3L1G3157GM,115
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NX3L1G3157 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 10ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 52ns |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
NX3L1G3157GM,115 Overview
The electronic component is convenient to ship overseas because it is packed in a 6-XFDFN. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 2:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~125°C TA is the extended operating temperature. In total, there are 6 terminations. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 1.65V voltage supply. It is injected into the electrical part body with 6 pins. A SPDT switching circuit is used to build these analog multiplexers. A 1 circuit is present in this switch device. Search with NX3L1G3157 if you are looking for analog multiplexer variants. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage of 1.4V~4.3V is required for this switch device, which drains from a single voltage source.
NX3L1G3157GM,115 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 60MHz
NX3L1G3157GM,115 Applications
There are a lot of NXP USA Inc. NX3L1G3157GM,115 Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- SDH
- Sample-and-hold systems
- PCMCIA cards
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- PBXs
- Audio and video switching
- Medical systems
- Digital access cross connects
- Audio/video switches