NCP330MUTBG
| Parameters | |
|---|---|
| Published | 2008 |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Resistance | 26mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Rating | 225mW |
| Max Power Dissipation | 580mW |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | NCP330 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current | 5A |
| Output Configuration | High Side |
| Power Dissipation | 580mW |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3A |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Rds On (Typ) | 26m Ω |
| Height | 500μm |
| Length | 1.2mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFDFN Exposed Pad |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
NCP330MUTBG Overview
It is package in Tape & Reel (TR) case.The 4-UFDFN Exposed Pad package contains it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.A lighting driver with Slew Rate Controlled features is available.I believe it belongs to the NCP330 family.A total of 4 terminations can be found in it.The 4 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 3A.The supply voltage of 5V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 4 pins.It has a resistance of 26mOhm.When this is the case, the output current is set to 3A.This gadget uses an analog IC, which is SPST in this case.There are a total of 1 available channels.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.This system has a maximum current requirement of 3A.
NCP330MUTBG Features
Supplied from 5V
Resistance of 26mOhm
1 channels
NCP330MUTBG Applications
There are a lot of ON Semiconductor NCP330MUTBG Power Switches ICs applications.
- Low Voltage I/O System Power
- HDD and SSD
- USB Power Distribution
- Smart Phones, Feature Phones
- Portable Music Players
- PDAs
- Set-top-box
- Smartphone and PDA
- Hot Swap
- Various applications equipped with buttons