MK14-1A66B-200W
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Package / Case | Molded Body |
| Surface Mount | NO |
| Mounting Feature | PANEL MOUNT |
| Actuator Material | Magnet |
| Operating Temperature | -30°C~70°C TA |
| Published | 2014 |
| Series | MK14 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Wire Leads |
| Type | Reed Switch |
| Voltage - Rated DC | 200V |
| Reach Compliance Code | unknown |
| Current Rating | 500mA |
| Termination Style | Wire Leads |
| Body Length or Diameter | 4mm |
| Output Type | SPST-NO |
| Operating Supply Voltage | 200V |
| Nominal Supply Current | 1.25A |
| Response Time | 100 μs |
| Sensing Method | Magnetic |
| Housing | PBT FIBERGLASS REINFORCED |
| Must Operate | 10 ~ 30AT |
| Must Release | 4 ~ 27AT |
| Body Height | 25.5mm |
| RoHS Status | ROHS3 Compliant |
MK14-1A66B-200W Overview
Modules of magnetic position sensors are packaged in Molded Body packages. Magnetic position sensors need to operate with a 200V supply voltage. Generally, the sensors modules will draw 1.25A current. When a sensor module is used in a DC circuit, the rated voltage should be 200V.
MK14-1A66B-200W Features
Package / Case: Molded Body
MK14 Series
Operating Temperature: -30°C~70°C TA
Operating Supply Voltage: 200V
Response Time: 100 μs
MK14-1A66B-200W Applications
There are a lot of Standex-Meder Electronics MK14-1A66B-200W Magnetic Position Sensors Modules applications.
- Reed switch replacement
- Exercise equipment
- Steering position
- Localization of ferromagnetic
- Monitor protections of the safety gates
- Factory automation
- White goods
- Control of magnetic apparatus
- Detection of ferromagnetic
- Conducting objects