MCP6564-E/SL
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP6564 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Nominal Supply Current | 100μA |
| Output Current | 50mA |
| Propagation Delay | 80 ns |
| Quiescent Current | 130μA |
| Response Time | 56 ns |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6.5V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 130μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | 5mV |
| CMRR, PSRR (Typ) | 66dB CMRR, 70dB PSRR |
| Natural Thermal Resistance | 120 °C/W |
| Height | 1.25mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP6564-E/SL Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.This package has been designed with Tube .The device is designed with 14 terminations.The electrical component here belongs to the Comparator family.With a voltage of 1.8V supplied, the comparator is capable of performing a wide range of demanding tasks.This is a typical comparator of type General Purpose .The total number of elements is 4 .The device includes 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .Electronic comparator has 14 pins.Try search MCP6564 to get more pin-to-pin solutions for your special needs.A quiescent current of 130μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 100μA when using the device.A power supply of 2/5V is sufficient for the operation of the device.You are allowed to input a maximum current of 1pA into the device.
MCP6564-E/SL Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 130μA
MCP6564-E/SL Applications
There are a lot of Microchip Technology MCP6564-E/SL linear comparators applications.
- Mobile Communications
- Building automation
- Portable Battery Monitoring
- Battery-Powered Electronics
- Current and voltage sensing
- Infotainment & cluster
- Simple Analog-to-Digital Converters (ADCs)
- General Purpose Low Voltage Applications
- Wide Range VCO; MOS Clock Timers
- Limit Comparators