MCP14E3-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.1W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | MCP14E3 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 4A |
| Nominal Supply Current | 750μA |
| Power Dissipation | 1.1W |
| Output Current | 4A |
| Max Supply Current | 2mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 15ns 18ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.07 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E3-E/P Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube is the packaging method.Its recommended mounting way is Through Hole.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel, P-Channel MOSFET gate.Temperature range -40°C~150°C TJ is allowed for this device.A type of Inverting is used for input in this program.Initially, the configuration is composed of 8 terminations.There are various parts that can be found under its base part number MCP14E3.The mount method is Through Hole.At the time of design, it is configured with 8 pins.In order to operate, a voltage of 12V has to be applied.The interface IC of the device is PUSH-PULL BASED MOSFET DRIVER.As a maximum, there is 4A limit to the output current.There are several useful electronic components within its subcategory MOSFET Drivers.A total of 8 pins are available for component connections.The basis of this system consists of 2 outputs.Mosfet gate drivers supports a current output of 4A.The maximum power dissipation of 1.1W shows its maximum capability to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 2mA.In this case, it outputs 17.975V voltage.
MCP14E3-E/P Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.1W
MCP14E3-E/P Applications
There are a lot of Microchip Technology MCP14E3-E/P gate drivers applications.
- RGB applications
- Pulse transformer drivers
- Telecom switch mode power supplies
- Automotive Applications
- White Goods - Air Conditioner, Washing Machine,
- General Purpose 3-Phase Inverter
- Portable Media Players
- Commercial air-conditioning (CAC)
- A/D drivers
- Isolated Gate Driver Supplies