MCP14E10-E/MF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP14E10 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Nominal Supply Current | 1.8mA |
| Output Current | 3A |
| Max Supply Current | 1.8mA |
| Input Type | Non-Inverting |
| Rise Time | 14ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 950μm |
| Length | 4.92mm |
| Width | 5.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP14E10-E/MF Overview
For greater flexibility, its 8-VDFN Exposed Pad package is used.A packaging method of Tube is used.This configuration includes 2 drivers.Surface Mount is mounted in the way of the device.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.In this device, temperatures must not exceed -40°C~150°C TJ.The input type is Non-Inverting.Its configuration is based on a total of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number MCP14E10.When the device is designed, it has 8 pins.A supply voltage of 12V is required for operation.The interface chip of the system is HALF BRIDGE BASED MOSFET DRIVER.There is a maximum output current of 3A that can be achieved.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A board with 8 component pins is available.Mosfet gate drivers supports a current output of 3A.For higher stability, the supply current should be kept at 1.8mA.
MCP14E10-E/MF Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
MCP14E10-E/MF Applications
There are a lot of Microchip Technology MCP14E10-E/MF gate drivers applications.
- Portable Media Players
- Telecom switch mode power supplies
- Broadcast equipment
- Power factor correction (PFC) circuits
- Smart Phones
- Video amplifiers
- UPS systems
- Motor Control
- PCMCIA applications
- High current laser/LED systems