MCP102-450E/TO
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Bulk |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Base Part Number | MCP102 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 1.75μA |
| Max Supply Current | 1.75μA |
| Adjustable Threshold | NO |
| Quiescent Current | 1μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 80ms Minimum |
| Min Reset Threshold Voltage | 4.314V |
| Max Reset Threshold Voltage | 4.446V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.314V |
| Overvoltage Threshold | 4.446V |
| Height | 4.95mm |
| Length | 4.95mm |
| Width | 3.94mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MCP102-450E/TO Overview
A total of 3 terminals are used to mount this power management. Power management is packaged in a Bulk way. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management conducts in a 1-voltage supply. Through Hole mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. 3 pins are present in total in this power management. There are 3 pins on the power managment ic. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Through Hole mounting type is recommended. Temperature setting for the supervisors should be -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 1.75μA. A similar IC managements number of the manufacturer can always be found by using MCP102, the base power ics number. A maximum supply temperature of 1.75μA can be used with this power management.
MCP102-450E/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current
MCP102-450E/TO Applications
There are a lot of Microchip Technology MCP102-450E/TO Voltage Supervisors applications.
- Electronics installed in the vehicle
- FPGA design
- Insulation fault location system
- DVR
- Medical-specific insulation monitor
- Unattended substation automation
- Electric heating appliances
- Data storage applications
- Power distribution systems of infant care room
- Power communication system