MCIMX255AJM4
| Parameters | |
|---|---|
| Package / Case | 400-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | i.MX25 |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.45V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX255 |
| JESD-30 Code | S-PBGA-B400 |
| Supply Voltage-Max (Vsup) | 1.52V |
| Power Supplies | 1.2/1.51.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.38V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 2.0V 2.5V 2.7V 3.0V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure JTAG, Secure Memory, Tamper Detection |
| Display & Interface Controllers | Keypad, LCD, Touchscreen |
| Height Seated (Max) | 1.6mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
MCIMX255AJM4 Overview
The microprocessor is conveniently packaged in 400-LFBGA, making it easy to ship internationally. A high level of reliability is provided by using an advanced packaging method Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. The operating temperature around -40°C~85°C TA should be understood. The cpu microprocessor belongs to the i.MX25 series. Core-wise, this CPU has a ARM926EJ-S processor. The CPU uses LPDDR, DDR, DDR2 RAM controllers. Featuring CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART interfaces, this microprocessor can better serve you. 2.0V 2.5V 2.7V 3.0V 3.3V is the CPU's I/O address. It is a MICROPROCESSOR in terms of uPs/uCs/Peripheral ICs. You can search for variants of a microprocessor with MCIMX255. Overall, there are 400 terminations. The microprocessor should be turned on and run with a voltage supply of 1.45V volts. Supply current is maximum at 1.52V. A typical Microprocessors embedded microprocessor. There is a clock frequency of 24MHz on the microprocessor. According to datasheets, the micro processor requires 1.2/1.51.8/3.3V power sources.
MCIMX255AJM4 Features
ARM926EJ-S Core
MCIMX255AJM4 Applications
There are a lot of NXP USA Inc. MCIMX255AJM4 Microprocessor applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Smart instruments
- Xbox
- Set-top boxes
- Industrial instrumentation devices
- Removable disks
- Equipment control
- Petrochemical
- Leakage current tester
- Data acquisition and control