MC74HCT374ADWR2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 30MHz |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 47 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
MC74HCT374ADWR2 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is operating at a temperature of -55°C~125°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. It should not exceed 30MHzin its output frequency. In total, there are 1 elements. Currently, there are 20 terminations. An input voltage of 5Vpowers the D latch. The electronic device belongs to the HCTfamily. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be kept above 4.5V. There are 2 ports embedded in the flip flops.
MC74HCT374ADWR2 Features
Tape & Reel (TR) package
74HCT series
MC74HCT374ADWR2 Applications
There are a lot of Rochester Electronics, LLC MC74HCT374ADWR2 Flip Flops applications.
- Instrumentation
- Power down protection
- Registers
- Event Detectors
- Digital electronics systems
- Individual Asynchronous Resets
- Differential Individual
- Counters
- High Performance Logic for test systems
- Convert a momentary switch to a toggle switch