MC10EL52DTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 10EL |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EL52 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 1 |
| Number of Bits | 1 |
| Clock Frequency | 2.8GHz |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 365 ps |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 25mA |
| Halogen Free | Halogen Free |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 25mA |
| fmax-Min | 2200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2200000000Hz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC10EL52DTR2G Overview
The flip flop is packaged in a case of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). Package Tape & Reel (TR)embeds it. Differentialis the output configured for it. There is a trigger configured with Positive, Negative. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of -4.2V~-5.7V volts. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. JK flip flop belongs to the 10ELseries of FPGAs. A frequency of 2.8GHzshould be the maximum output frequency. There is a consumption of 25mAof quiescent energy. There are 8 terminations,Members of the 10EL52family make up this object. It is powered from a supply voltage of 5V. There is an electronic part that is mounted in the way of Surface Mount. With its 8pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with 1bits. The maximal supply voltage (Vsup) reaches 5.7V. The supply voltage (Vsup) should be maintained above 4.2V for normal operation. Its superior flexibility is attributed to its use of 1 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. There are -5.2V power supplies attached to it. Additionally, you may refer to the additional NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V of the electronic flip flop.
MC10EL52DTR2G Features
Tape & Reel (TR) package
10EL series
8 pins
1 Bits
-5.2V power supplies
MC10EL52DTR2G Applications
There are a lot of ON Semiconductor MC10EL52DTR2G Flip Flops applications.
- Buffer registers
- Cold spare funcion
- ESD performance
- Balanced 24 mA output drivers
- Communications
- Shift Registers
- Modulo – n – counter
- Patented noise
- Supports Live Insertion
- Consumer