MAX985EXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 247mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX985 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Response Time | 450 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX985EXK+T Overview
A convenient packaging is provided in the form of 5-TSSOP, SC-70-5, SOT-353 .The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.The chip is packaged with Tape & Reel (TR) .There are 5 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as General Purpose .Currently, it consists of only 1 elements.The board includes 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .Electronic comparator has 5 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX985 .A quiescent current of 24μA is displayed by this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.The nominal supply current of the device should be 20μA for normal use.If the current supply exceeds 20μA , the comparator could malfunction.Input current to the device is limited to 1pA .
MAX985EXK+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX985EXK+T Applications
There are a lot of Maxim Integrated MAX985EXK+T linear comparators applications.
- Metering Systems
- Portable and Battery-Powered Systems
- Power Supervision
- System control and monitoring
- Lithium ion battery monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Limit Comparators
- General-Purpose, Low-Voltage Applications
- Notebooks and PDAs
- Consumer Medical Electronics