MAX985EBT+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFBGA, CSPBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX985 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 20μA |
| Max Supply Current | 20μA |
| Propagation Delay | 450 ns |
| Quiescent Current | 24μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 24μA |
| Voltage - Input Offset (Max) | 5mV @ 5.5V |
| Current - Input Bias (Max) | 1pA @ 5.5V |
| Hysteresis | ±3mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX985EBT+T Overview
To facilitate transportation, it comes packaged in 6-WFBGA, CSPBGA .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.Ready for shipping in Tape & Reel (TR) package.The device is designed with 6 terminations.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 1 elements.As a result, it contains 6 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 6 pins on the comparator.You can find more pin-to-pin solutions by searching MAX985 .In this comparator, the quiescent current is 24μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current be 20μA in order to use the device normally.If the current supply exceeds 20μA , the comparator could malfunction.The maximal current your can input into the device is 1pA .
MAX985EBT+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 24μA
MAX985EBT+T Applications
There are a lot of Maxim Integrated MAX985EBT+T linear comparators applications.
- Current and voltage sensing
- Zero-Crossing Detectors
- Point of load regulators
- Analog front end
- Automatic Test Equipment
- Pulse, Squarewave, and Time Delay Generators
- Hand-Held Electronics
- Simple Analog-to-Digital Converters (ADCs)
- Power Supervision
- Infotainment and Clusters