MAX967EUA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX967 |
| Pin Count | 8 |
| Output Type | Open-Drain, Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 1.5/5.5V |
| Nominal Supply Current | 10μA |
| Max Supply Current | 10μA |
| Propagation Delay | 20 μs |
| Quiescent Current | 16μA |
| Response Time | 20000 ns |
| Common Mode Rejection Ratio | 56.48 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 15mV |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 50nA |
| Current - Quiescent (Max) | 16μA |
| Voltage - Input Offset (Max) | 15mV @ 5.5V |
| Current - Input Bias (Max) | 0.05μA @ 5.5V |
| Hysteresis | ±1mV |
| CMRR, PSRR (Typ) | 56.48dB CMRR, 80dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX967EUA+ Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a Open-Drain, Rail-to-Rail output type for this comparator.The chip is packaged with Tube .Electronic comparator is possible to find the 8 terminals of the comparator.The electrical component in this case belongs to the Comparators family.With a 3V voltage supply, the comparator can perform multiple demanding tasks.When it comes to types, this comparator is a typical with Voltage Reference .Electronic comparator has a total of 2 elements.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX967 .The comparator presents a quiescent current of 16μA volts.There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 10μA when using the device.Current supply exceeding 10μA could cause disfunction of the compartator.The device can be operated with 1.5/5.5V power supplies.
MAX967EUA+ Features
Open-Drain, Rail-to-Rail output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 16μA
MAX967EUA+ Applications
There are a lot of Maxim Integrated MAX967EUA+ linear comparators applications.
- Portable Battery Monitoring
- Industrial
- Battery management and protection
- Infotainment and Clusters
- Handheld Instruments
- Hand-Held Electronics
- Self-diagnostics
- General-Purpose, Low-Voltage Applications
- General Purpose Low Voltage Applications
- Infotainment & cluster