MAX892LEUA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 330mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX892 |
| Pin Count | 8 |
| Output Type | P-Channel |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 13μA |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Control Mode | CURRENT-MODE |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.05mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 2 μs |
| Switcher Configuration | BUCK |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 250m Ω |
| Max Junction Temperature (Tj) | 135°C |
| On-State Resistance | 250mOhm |
| Height | 1.1mm |
| Length | 3.05mm |
| Width | 3.05mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX892LEUA+ Overview
As you can see, it's packaged in the way of a Tube.It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.The MAX892 family contains this object.It consists of 8 terminations in total.For operation, we use the 8 pins.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 250mA.Surface Mount is mounted in the way.As a result, it has a total of 8 pins.In this case, there is 500mOhm resistance in the LED driving board.This results in a 250mA output current.The analog IC used in this lighting driver is SWITCHING REGULATOR.In order to maximize efficiency, the supply voltage should be set to 5.5V.It has a maximum input voltage of 5.5V volts.It requires 2.7V volts as the minimum input voltage.Its maximum supply current for operation is 0.05mA.Currently, there are 1 inputs available.
MAX892LEUA+ Features
Resistance of 500mOhm
MAX892LEUA+ Applications
There are a lot of Maxim Integrated MAX892LEUA+ Power Switches ICs applications.
- USB Protection
- HDD and SSD
- Solid-State Drives
- USB3.1 Power Delivery
- Storage (HDDs, SSDs)
- Mobile Communication Devices
- Wearable Devices
- Solid State Drivers
- Hot-Swap Systems
- Wireless Modem Data Cards