MAX489ECSD+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 667mW |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX489 |
| Pin Count | 14 |
| Output Voltage | 3V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 120μA |
| Power Dissipation | 667mW |
| Propagation Delay | 250 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 2000 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX489ECSD+ Overview
Designed for common LEDs, this driver IC features an enhanced 14-SOIC (0.154, 3.90mm Width) package.The Tube package contains this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver consumes 4.75V~5.25V for its power supplyThis electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.There are 14 terminations in this wide receiver so that signals can be driven from the data and received.In this package, you will find 14 market-standard pinouts for this transceiver.Since the part number MAX489 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.14-pin driver IC with improved power dissipation control.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a voltage supply of 5V required in order for this transceiver module to be operated.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.Transceivers implemented by this IC total 1 in total.Voltage can be delivered at 3V by Wide receiver.
MAX489ECSD+ Features
Tube package
14 pin count
14 pins
5V power supply
MAX489ECSD+ Applications
There are a lot of Maxim Integrated MAX489ECSD+ Drivers/Receivers/Transceivers applications.
- Carrier phase observations
- Sensor reporting
- Thermal management
- Satellite radio receiver
- Interconnection between switches and computers
- Metro access rings
- Mainframes, workstations or storage devices
- Fiber-to-the-desktop
- AV receiver
- Structural bonding